@article { author = {توکل مقدم, مریم and رشتچی, مریم and پاشایی, الناز and رضاپور, مرتضی and شایق, فلورا}, title = {Patent analysis of hydrocarbon desulfurization processes}, journal = {Farayandno}, volume = {8}, number = {44}, pages = {5-19}, year = {2014}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {The presence of sulfur component in natural gas,crude oil and the products thereof, impacts negatively upon the economic value of such resources and poses serious environmental and corrosion problems.In the light of the increasing number of research in the field of sulfur component emissions associated with oiland gas development,the present study is an effort aiming at mining all the patent information in the field of sulfur removal from hydrocarbon fluids and analysis thereof at the strategic level.The results show that absorption and bio-desulfurization relating in the field of gas sweetening and the processes based on extraction and adsorption in the field of sulfur removal from liquid hydrocarbon feed are the most attractive and innovative processes with more increasing patent publication rates.The analysis of the acquired information is of great value and benefit in determining the research and technology orientation in the field and to the inventors active in the field.}, keywords = {Sulfur Removal,hydrocarbon fluids,Patent Analysis,Patent}, title_fa = {تحلیل اسناد ثبت اختراع در حوزه فرآیندهای گوگردزدایی از سیالات هیدروکربنی}, abstract_fa = {حضورترکیبات گوگردی درسیالات هیدروکربنی ومحصولات آن،مشکلات متعددی نظیرخوردگی،مسمومیت کاتالیزورهای کارخانجات دریافت کننده محصولات گاز و مایع، مشکلات زیست محیطی،کاهش ارزش حرارتی وکاهش قیمت بوجود می آورند.با توجه به تحقیقات گسترده به منظور دستیابی به روشها وفن آوریهای حذف یا کاهش این آلاینده هاتاحدمطلوب ومقرون بصرفه توسط بسیاری از مراکز تحقیقاتی،مطالعه حاضر با هدف دستیابی به کلیه اختراعات ثبت شده دراین حوزه تکنولوژی و تحلیل آنها در سطح استراتژیک انجام شده است.نتایج تحلیل در بازه زمانی موردمطالعه،حاکی ازآن است که درحوزه فناوری‌های مربوط به حذف ترکیبات گوگردی ازگازها،فرآیندهای جذب توسط حلال وفرآیندهای گوگردزدایی بیولوژیک ودرحوزه گوگردزدایی ازخوراکهای هیدروکربنی مایع،فرآیندهای برپایه استخراج وجذب سطحی عرصه های موردتوجهی برای مخترعین حوزه گوگردزدایی به حساب می‌آیندوروند نوآوری های این حوزه روبه افزایش است.نتایج این پژوهش نکات ارزشمندی ازجهتگیری‌های پژوهشی دراین حوزه را نمایان ساخته که می تواند برای تمامی برنامه ریزان پژوهش وفناوری وهمچنین پژوهشگران کشور درارتباط بااین فناوری مفیدباشد.}, keywords_fa = {گوگردزدایی,سیالات هیدروکربنی,تحلیل پتنت,سند ثبت اختراع}, url = {https://www.farayandno.ir/article_8055.html}, eprint = {https://www.farayandno.ir/article_8055_140ef52c17f2c0921ad0b60b2c744416.pdf} } @article { author = {شریعتمدار مرتضوی, سید مهدی and بهروزی اصفهانی, افشین and ضیغم زاده الیادرانی, رسول}, title = {Feasibility study of reuse of industrial treated wastewater as the make-up stream in oil and gas industries}, journal = {Farayandno}, volume = {8}, number = {44}, pages = {20-28}, year = {2014}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {Nowadays, energy conservation issue is being considered as a key factor in product cost reduction strategy for providing competitive advantages. In this paper, reuse of treated wastewater as one of the potential energy resources in conjunction with oil and gas industries, was assessed. Consequently, two approaches namely as; new technology application and direct application, were determined. According to the conceptual and economical analysis, the desired alternatives for new technology application and direct one got selected as reverse osmosis technology, and cooling tower make-up supply, respectively. The reverse osmosis technology involves the total capital cost of 7.9 million US$ for desalinating of 160 m3/h treated wastewater, by which the cost of desalinated water and payback period are equal to 3.25 $/m3 and 3 years, respectively.}, keywords = {Feasibility studies,desalination of treated wastewater,Reverse osmosis,Electrodialysis,economical analysis}, title_fa = {امکان سنجی استفاده از آب تصفیه شده واحد پساب صنعتی در قالب جریان جبران‌ساز در صنایع نفت و گاز}, abstract_fa = {امروزه مبحث نگهداشت انرژی به عنوان یک گزینه کلیدی در امر کاهش قیمت محصول که نتیجه آن ایجاد زمینه برای مزیت رقابتی است، مطرح می‌باشد. در این مقاله، آب خروجی از واحد پساب به عنوان یکی از منابع انرژی با هدف استفاده مجدد در صنعت نفت و گاز بررسی شد. بدین منظور دو حالت استفاده از فناوری جدید با هدف شیرین‌سازی آب تصفیه شده و استفاده مستقیم بدون کاربرد فناوری جدید در نظر گرفته شد. طبق بررسی‌های مفهومی و اقتصادی، گزینه‌های مطلوب برای استفاده از فناوری جدید و کاربرد مستقیم، به ترتیب اسمز معکوس و کاربرد در قالب جریان جبران‌ساز برج خنک‌کننده انتخاب شدند. با انتخاب فناوری اسمز معکوس و صرف هزینه کل سرمایه‌گذاری برابر 7/9 میلیون دلار به منظور شیرین‌سازی 160 مترمکعب در ساعت آب تصفیه‌شده واحد پساب، در نهایت قیمت تمام شده هر متر مکعب آب شیرین تولید شده 3/25 دلار و برگشت سرمایه 3 سال برآورد می‌گردد.}, keywords_fa = {مطالعه امکانسنجی,شیرین‌سازی پساب صنعتی,اسمز معکوس,الکترودیالیز,بررسی اقتصادی}, url = {https://www.farayandno.ir/article_8056.html}, eprint = {https://www.farayandno.ir/article_8056_56bf207b643f53541d518dc0b24894a0.pdf} } @article { author = {جعفری بهبهانی, ترانه and سعیدی مهر, احمد}, title = {Investigation of Equilibrium adsorption of gases on adsorbents}, journal = {Farayandno}, volume = {8}, number = {44}, pages = {29-38}, year = {2014}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {Adsorption of gas on solid adsorbents is one of the important processes in gas industry and industrial wastewater treatment processes. In this work, the equilibrium adsorption models of gas including two and three parameter isotherms were studied. Also, the Langmuir، Freundlich، Temkin and Redlich- Peterson models have been investigated to account the adsorption amount of gas on adsorbents and adsorption behavior. After mathematical formulation of these models, the tuning parameters were adjusted. In order to compare the performance of studied models, the gas adsorption experimental data reported in the literature were correlated using deviation of the predicted gas adsorption amount from their experimental results. The results show that the Freundlich and Redlich- Peterson models predict more accurately the gas adsorption experimental data on adsorbents in comparison to other models. Also, the Temkin model predicts accurately the gas adsorption experimental data on solid adsorbents in comparison to Langmuir model.}, keywords = {Equilibrium adsorption of gas,Isotherm,adsorbent}, title_fa = {مطالعه و بررسی جذب تعادلی گازها درجاذب های جامد}, abstract_fa = {جذب گازها بر روی جاذب های جامد یکی از فرآیندهای مهم در صنایع گاز و همچنین در تصفیه پساب های صنعتی می باشد. در این مقاله مدلسازی فرآیند جذب گازها درجاذب های جامد به منظور بررسی رفتار سیستم جذب و همچنین پیش بینی میزان جذب مورد بررسی قرار گرفته است.در این پژوهش پس از معرفی کلیه مدلهای دو و سه پارامتری جذب تعادلی گاز ،مدل های لانگمویر، فرندلیچ، تمکین و ردلیش-پترسون انتخاب و پس از فرمولاسیون ریاضی و تنظیم پارامترهای هر مدل نتایج تجربی با استفاده از مدلهای فوق الذکر پیش بینی شده است. .به منظور بررسی عملکرد هر مدل، انحراف نسبت به داده های آزمایشگاهی برای هر مدل محاسبه شده است. نتایج نشان میدهد که مدل های جذب فرندلیچ و ردلیش- پترسون دارای عملکرد بهتری نسبت به سایر مدل های مورد مطالعه در فرآیند جذب گاز می باشند و دارای انحراف کمتری نسبت به نتایج آزمایشگاهی هستند.}, keywords_fa = {جذب تعادلی گاز,ایزوترم,جاذب}, url = {https://www.farayandno.ir/article_8057.html}, eprint = {https://www.farayandno.ir/article_8057_bc5fe025cf4d216a257e3e2436ebb3d1.pdf} } @article { author = {Salimi, Farhad and Salimi, Javad}, title = {A review on the applications of nanofluids in the heat and mass transfer}, journal = {Farayandno}, volume = {8}, number = {44}, pages = {39-49}, year = {2014}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {Nanofluid is defined as a fluid in which nanoparticles below 100 nm in diameter are stably suspended in the basefluid. The adding of nanofluid can affect on thermophysical properties of fluids. Todays research on nanifluids has been extended widely. The results of research have shown that the adding of nanoparticles to basefluid improve heat and mass transfer coefficient. The increasing of heat and mass transfer coefficient increases efficiency and reduces size and the cost of equipment. Therefore, in this paper, the applications of nanofluid in the heat and mass transfer process and also the mechanism of them will be reviewed.}, keywords = {nanofluid,Heat transfer coefficient,Mass transfer coefficient}, title_fa = {مروری بر کاربردهای نانوسیال در زمینه های انتقال حرارت و انتقال جرم}, abstract_fa = {نانوسیال به عنوان سیالی که ذرات با اندازه بین 1 تا 100 نانومتر و به صورت پایدار در سیال پایه معلق هستند، تعریف می شوند. افزودن نانوذرات باعث می شود که خواص ترموفیزیکی سیال تحت تاثیر قرار بگیرد. امروزه تحقیقات در زمینه نانوسیالات ابعاد گسترده ای پیدا کرده است. تحقیقات نشان داده که استفاده از نانوذرات در سیال پایه باعث می شود که ضرایب انتقال حرارت و جرم افزایش یابد. افزایش ضرایب انتقال حرارت و جرم سبب افزایش راندمان، کاهش اندازه تجهیزات و همچنین هزینه ساخت آنها می شود. لذا در این مقاله مروری بر کاربردهای نانوسیال در فرایندهای انتقال حرارت و جرم و همچنین بررسی مکانیزم های حاکم بر آنها پرداخته می شود.}, keywords_fa = {نانوسیال,ضریب انتقال حرارت,ضریب انتقال جرم}, url = {https://www.farayandno.ir/article_8058.html}, eprint = {https://www.farayandno.ir/article_8058_2488667f4ceb50074c53896c52fbf44a.pdf} } @article { author = {Assa, Farnaz and Rafiaa, Nesa and Babaluo, Ali Akbar and Kahforoushan, Davood}, title = {A Review on the Performance of Membrane Process for CO2 Separation from Gas Streams}, journal = {Farayandno}, volume = {8}, number = {44}, pages = {50-60}, year = {2014}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {Recently increasing energy consumption and subsequent increase of emissions from fossil fuel combustion have caused major enviromental problems in the world. As reported in literature, about three quarters of carbon dioxide increase is due to fossil fuel combustion, therefore to avoide of greenhouse gases emissions especially carbon dioxide, has become an important concern in industries. In recent years, membrane processes have shown high potential to be replaced conventional CO2 separation processes from gas streams. No phase change, low energy consumption, small scale of membrane systems, no waste streams, easy operation, compatibility with environment and low capital and operating cost propel researchers to apply this novel technology. In this study, a review of conventional membranes in separating of carbon dioxide from the gas streams is done and the performance of membranes are compared using the trade-off curves. It is shown that silica membranes have higher performance compared to other conventional membranes.}, keywords = {Separation,Membrane processes,Silica membrane,Carbon dioxide,Gas streams}, title_fa = {مروری بر عملکرد انواع فرآیندهای غشایی به منظور جداسازی دی اکسیدکربن از جریان های گازی}, abstract_fa = {اخیراً افزایش بی‌رویه مصرف انرژی و انتشار آلاینده‌های حاصل از احتراق سوخت‌های فسیلی، تبدیل به مشکلات زیست محیطی در جهان شده‌ است. طبق آمارهای موجود، حدود سه چهارم افزایش دی‌اکسیدکربن به دلیل سوزاندن سوخت‌های فسیلی است، لذا جلوگیری از افزایش انتشار گازهای گلخانه‌ای به ویژه گاز دی‌اکسیدکربن، به دغدغه‌ای مهم در صنایع مبدل گردیده است. در سال‌های اخیر فرآیندهای غشایی پتانسیل بالایی برای جایگزینی روش‌های متداول جداسازی دی‌اکسیدکربن از جریان‌های گازی نشان داده‌اند. استفاده انرژی پایین، اندازه کوچک، نبود جریان‌های اتلافی، سادگی عملیات، سازگاری با محیط زیست و هزینه پایین محققان را به سمت استفاده از این فناوری سوق داده است. در این تحقیق، به بررسی انواع غشاهای متداول در جداسازی دی‌اکسیدکربن از جریان‌های گازی پرداخته شده و در نهایت عملکرد غشاها با استفاده از نمودار ارزیابی مقایسه می‌شوند. طی این بررسی غشاهای سیلیکایی عملکرد مناسب‌تری نسبت به دیگر غشاهای متداول از خود نشان داده‌اند.}, keywords_fa = {جداسازی,فرآیندهای غشایی,غشای سیلیکایی,دی اکسیدکربن,جریان های گازی}, url = {https://www.farayandno.ir/article_8059.html}, eprint = {https://www.farayandno.ir/article_8059_9f1f8e5e3c5d41302a231d17a93e7384.pdf} } @article { author = {سلیمانی دیلمانی, کاوه}, title = {Investigation of Pressure Safety Valve Sizing Methods by Applying Various Thermodynamic Models In an Oil Off-Shore Platform (a Case Study)}, journal = {Farayandno}, volume = {8}, number = {44}, pages = {61-71}, year = {2014}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {One of the significant concepts drawing official attractions in these days is the process safety. This is more important specifically in off-shore oil and gas platforms when releasing hydrocarbons could cause irreversible damages to both environment and personnel. One important instrument device which can provide safety for process equipment in oil and gas fields is PSV. Adequate and suitable size of PSV orifice is of great importance. The main objective of the present work is to compare prediction results of different thermodynamic models regarding relieving fluid properties and also applying different methods to size PSV orifice. It has concluded that some of the thermodynamic models are not able to predict critical properties of fluid, they are not applicable in sizing PSVs with first method (using critical pressure), however, orifice designation in methods of sizing are the same when other models were introduced, though, using depressurizing-HYSYS produced different results.}, keywords = {'Pressure safety valve","sizing of pressure safety valve","process safety","safety equipment"}, title_fa = {مطالعه موردی: به کارگیری چندین مدل ترمودینامیکی در مقایسه روش های تعیین اندازه شیرهای اطمینان فشار دریک سکوی فراساحلی تولید نفت}, abstract_fa = {امروزه اهمیت تجهیزات پرکاربرد فراهم کننده ایمنی به خصوص در صنایع فراساحلی حائز اهمیت بسیار می باشد. مقاله حاضر با هدف بررسی روش های موجود تعیین اندازه شیرهای ایمنی به عنوان یکی از پرکاربردترین تجهیزات ایمنی با به کارگیری مدل های ترمودینامیکی مشهور و مقایسه این روشها و همچنین نقش این مدل ها در پیش بینی مشخصات سیال در هنگام عبور از شیرهای ایمنی تهیه شده است. نتایج بررسی ها نشان می دهد برخی از مدل های ترمودینامیکی قادر به پیش بینی مشخصات نقطه بحرانی سیال نمی باشند و به همین دلیل برای تعیین اندازه شیرهای ایمنی کاربرد نخواهند داشت. همچنین این نتیجه حاصل گردید که در موردی که مدل ترمودینامیکی قابل استفاده باشد، تفاوتی در قطر اوریفیس شیر ایمنی بین دو روش استفاده از فشار بحرانی و دانسیته ثابت وجود ندارد، اما استفاده از ابزار Depressurizing نرم افزار HYSYS نتایج کاملا متفاوتی ارائه می دهد.}, keywords_fa = {"شیر ایمنی","روش های تعیین اندازه شیر ایمنی","ایمنی فرآیند","تجهیزات ایمنی"}, url = {https://www.farayandno.ir/article_8054.html}, eprint = {https://www.farayandno.ir/article_8054_4cd1fe2e0a851af8c1931bc79a60b548.pdf} }