@article { author = {جعفری بهبهانی, ترانه}, title = {Investigation on thermodynamic and hydrodynamic behavior of wax precipitation in pipe lines}, journal = {Farayandno}, volume = {9}, number = {48}, pages = {5-17}, year = {2015}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {In this research, the thermodynamic and hydrodynamic behavior of wax precipitation in crude oil has been investigated. The mechanisms of wax precipitation in pipe lines have been studied. Also, additives that improve the rheological behavior of crude oil and pour point have been investigated. Finally, thermodynamic models were studied and after mathematical formulation of these models, the tuning parameters were adjusted. In order to compare the performance of studied models, the wax precipitation experimental data reported in the literature were correlated using deviation of the predicted was precipitation amount from their experimental results. The results show that the Multi-Solid model predicts more accurately the wax precipitation experimental data with 17% deviation in comparison to other models.}, keywords = {Wax precipitation,Pipe lines,Pour point,rheology,Thermodynamic models}, title_fa = {بررسی رفتار ترمودینامیکی و دینامیکی رسوب واکس در خطوط لوله انتقال نفت خام}, abstract_fa = {در این تحقیق به بررسی رفتار ترمودینامیکی و هیدرودینامیکی رسوب واکس در نفت خام پرداخته شده است. بدین منظور در ابتدا مکانیزیم تشکیل واکس وسپس پارامترهای موثر در تشکیل رسوب واکس در خطوط انتقال نفت خام مورد مطالعه قرار گرفته اند. همچنین روشهای آزمایشگاهی اندازه گیری رسوب واکس و مشخصات آن معرفی گردیده ا ند. در ادامه مواد افزودنی جهت بهبود رفتار رئولوژی و نقطه ریزش نفت خام بررسی شده اند. در نهایت پس از معرفی مدلهای پیش بینی کننده رسوب واکس در نفت خام ، مدلسازی رسوب واکس با استفاده از داده های ارائه شده در مقالات انجام پذیرفت و میزان انحراف هر مدل مشخص گردید. نتایج این تحقیق نشان میدهد که مدل SS دارای انحراف بیشتری در حدود 26 درصد نسبت به مدل MSبا انحراف حدود17 درصددر پیش بینی میزان رسوب واکس در نفت خام می باشد.}, keywords_fa = {رسوب واکس,خط لوله,نقطه ریزش,رئولوژی,مدلهای ترمودینامیکی}, url = {https://www.farayandno.ir/article_12385.html}, eprint = {https://www.farayandno.ir/article_12385_aa61f3b1de64ad78993b3286cdac6707.pdf} } @article { author = {farzin nejad, najmeh and hassani rad, seyed jamal}, title = {An overview on the application of nanotechnology in lubricants}, journal = {Farayandno}, volume = {9}, number = {48}, pages = {18-35}, year = {2015}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {Lubrication plays an important role in the correct movement in contact surfaces, consistently and economically. Nowadays, in order to reach a considerable efficiency, all mineral and synthetic based lubricants require additives that can create certain properties. In recent years, nanotechnology and synthesis of nanomaterials have helped to reach new types of additives for lubricants with unique properties. These new additives have attracted lots of attention because of their unique properties and energy saving. In this paper we introduce and evaluate the used nanoadditives in lubricants, according to the conducted research in this area. It is believed that by using these additives, it would be possible to improve most fundamental properties, such as flash point, viscosity, pour point and resistance to friction, of lubricating oils.}, keywords = {Lubricants,Additives,Nanomaterials,Wear,Friction}, title_fa = {مروری بر کاربرد فناوری نانو در روانکارها}, abstract_fa = {روانکاری نقش مهمی در انجام حرکت به نحو صحیح، مداوم و اقتصادی در سطوح در تماس با یکدیگر ایفا می‌کند. امروزه کلیه روانکارهای با پایه معدنی و سنتزی، برای داشتن کارآیی مفید، نیازمند افزودنی‌هایی هستند که بتوانند خواص مورد‌نظر را در آنها ایجاد نمایند. در سال‌های اخیر، با بهره‌گیری از فناوری نانو و سنتز نانو مواد، نوع جدیدی از افزودنی‌ها برای روانکارها به دلیل خواص منحصر بفردشان پدیدار گشته‌اند. این افزودنی‌های جدید به سبب داشتن خواص بی‌نظیر و به دلیل صرفه‌جویی انرژی که سبب می‌شوند توجه زیادی را به خود جلب کرده‌اند. در این مقاله بر اساس مطالعه تحقیقاتی انجام شده بر روی نتایج کارهای ارائه شده در این زمینه، به معرفی و بررسی نانو افزودنی‌های به کار گرفته شده در روانکارها پرداخته شده است. با استفاده از این افزودنی‌ها، می‌توان بسیاری از خواص اساسی روغن مانند نقطه‌ اشتعال، گرانروی، نقطه ریزش و مقاومت در مقابل اصطکاک را بهبود بخشید.}, keywords_fa = {روانکارها,افزودنیها,نانو مواد,سایش,اصطکاک}, url = {https://www.farayandno.ir/article_12386.html}, eprint = {https://www.farayandno.ir/article_12386_f37aabb7f890ff36d580ab9f58d5389b.pdf} } @article { author = {shahi moghani, aref and Roozbehani, Behrooz and Shishesaz, Mohamadreza and Hahmedifar, Shahrokh}, title = {Catalytic degradation of mixture of polymer wastes into middle distillate products with using of novel catalyst AIT100}, journal = {Farayandno}, volume = {9}, number = {48}, pages = {36-43}, year = {2015}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {Catalytic cracking considered as the best alternative to plastic wastes recycling, accordingly investigated converting mixture of polymers (High and low density poly ethylene, poly propylene, poly styrene, poly ethylene terephthalate, poly vinyl chloride) into middle distillate in presence of novel catalyst AIT-100. In this work we follow of mass fraction in waste management department for real data, as we provided a semi batch reactor at constant pressure to processing. Finally more than 95% of raw materials converts into middle distillate products that include 12% gas, ranging between C1 and C4 and 83% liquid hydrocarbon, ranging between C5-C11+ with a balance of residue. The optimum condition for this yield reports at a temperature of 440 ºC and 10% of catalyst w/w% at atmospheric pressure.}, keywords = {Catalytic cracking,mixture of polymers,middle distillate,catalyst,Temperature}, title_fa = {تجزیه کاتالیستی مخلوط ضایعات پلیمری به محصولات میان تقطیری با استفاده از کاتالیست جدید AIT100}, abstract_fa = {شکست کاتالیستی بعنوان بهترین جایگزین برای بازیافت ضایعات پلاستیکی محسوب می شود. بر همین اساس تبدبل مخلوط پلیمرها ( پلی اتیلن سبک و سنگین، پلی پروپیلن، پلی استایرن، پلی اتیلن ترت فتالات و پلی وینیل کلراید ) در حضور کاتالیست100 AIT و تبدیل به محصولات هیدروکربوری سبک مورد بررسی قرار گرفت. در این کار مخلوط پلاستیک ها براساس ترکیب درصد سازمان بازیافت به منظور نزدیک بودن به واقعیت استفاده شده است. هم چنین برای تبدیل مخلوط پلیمرها به محصولات سبک از یک راکتور نیمه پیوسته در فشار اتمسفر بهره گرفتیم. در این تحقیق بیش از 95 درصد وزنی مواد ما به محصولات سبک تبدیل شدند که شامل 12 درصد گاز) ( C1-C4 و 83 درصد مایع) ( C5-C11+ و کمتر از 5 درصد باقیمانده می باشد. هم چنین شرایط بهینه برای این میزان بازده در دمای 440 درجه سانتی گراد و 10 درصد کاتالیست در فشار اتمسفر گزارش می شود.}, keywords_fa = {کراکینگ کاتالیستی,مخلوط پلیمرها,محصولات سبک,کاتالیست,دما}, url = {https://www.farayandno.ir/article_12387.html}, eprint = {https://www.farayandno.ir/article_12387_8ab585bc44266974111216dc8a9c909c.pdf} } @article { author = {Tayyebi, Shokoufe}, title = {Multiple-Fault Diagnosing System Based on Fuzzy-Genetic Algorithm for the Production of Toluene from n-Heptane}, journal = {Farayandno}, volume = {9}, number = {48}, pages = {44-52}, year = {2015}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {The design of accurate fault diagnosing systems aides process safety and also improves product quality. Therefore, in recent years, many researchers have conducted work on this topic and suggested various techniques for fault detection and diagnosis. In this paper, the fuzzy system based on knowledge of the process has been proposed for fault detection and diagnosis. In order to improve the performance of the diagnoser system, the genetic algorithm has been used to optimize membership function parameters of fuzzy diagnosis system. To test the performance of the proposed diagnose system, toluene production plant was used. The simulation results indicate that the proposed algorithm is capable of diagnosing various combinations (from two to four simultaneous faults) of simultaneous faults.}, keywords = {Fault detection and diagnosis,Fuzzy logic,genetic algorithm,Toluene production process}, title_fa = {طراحی سیستم عیب یاب فرایند تبدیل هپتان به تولوئن با استفاده از الگوریتم فازی- ژنتیک}, abstract_fa = {طراحی یک سیستم عیب یاب دقیق، نقش بسزایی در افزایش ایمنی و کیفیت محصولات فرآیند دارد. با توجه به اهمیت موضوع، محققان به منظور تشخیص عیب، روش های متعددی را ارائه داده اند. در این مقاله، به طراحی سیستم عیب یاب بر اساس منطق فازی که مبتنی بر دانش فرایند و مستقل از مدل است، پرداخته شده است. در این بررسی، به منظور دستیابی به دقت بالاتر در تشخیص عیوب، مقادیر بهینه پارامترهای توابع تعلق فازی با الگوریتم ژنتیک به دست آمده است. به منظور بررسی عملکرد الگوریتم پیشنهادی، به عیب یابی فرآیند تبدیل هپتان به تولوئن پرداخته شده است. نتایج ارائه شده نشان می دهد که سیستم عیب یاب طراحی شده، توانایی تشخیص چهار عیب هم زمان را دارد.}, keywords_fa = {تشخیص و شناسایی عیب,منطق فازی,الگوریتم ژنتیک,فرایند تبدیل هپتان به تولوئن}, url = {https://www.farayandno.ir/article_12388.html}, eprint = {https://www.farayandno.ir/article_12388_8487d89fbe897142bae2869a56f9fd96.pdf} } @article { author = {nouri delavar, akram and صبوری, محسن and پاشا, امیر and جوانمردی, مهدی}, title = {Failure analysis of an economizer tube in a steam generation systems}, journal = {Farayandno}, volume = {9}, number = {48}, pages = {53-65}, year = {2015}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {Corrosion in steam generation systems may lead to many problems in industrial units. The economizer and heating systems are the first parts in which corrosion happens. Due to use of boiler exhaust gases, an economizer is a key factor in increasing boiler thermal efficiency. Generally, corrosion in economizer equipment is due to O2, CO2 and NH3. In this work, the failure of a finned tube economizer is investigated by chemical analysis of the fin and tube samples, XRD and XRF analysis of corrosion product and the relation between the corrosion morphology and sediment composition. In addition, effect of tube thinning due to corrosion on mechanical strength is evaluated under operational conditions. The obtained results clearly showed that oxygen was the main cause of corrosion. Additionally, mechanical strength and resistance of the tube to internal pressure are higher than the minimum limit value despite tube thinning by corrosion.}, keywords = {Steam generation systems,Economizer,Corrosion,Mechanical Strength}, title_fa = {تجزیه و تحلیل علل تخریب تیوب در اکونومایزر سیستم تولید بخار}, abstract_fa = {خوردگی در سیستم‌های تولید بخار باعث مشکلات زیادی در واحدهای صنعتی می‌شود. اکونومایزر و گرم‌کننده آب تغذیه اولین مناطق‌ متأثر از خوردگی است. اکونومایزر به دلیل مصرف انرژی گاز خروجی از سیستم بویلر، عاملی کلیدی در افزایش بهره‌وری حرارتی بویلر است. خوردگی باعث کاهش بهره‌وری بویلر می‌شود. عموماً خوردگی در بویلر توسط اکسیژن، دی‌اکسیدکربن و آمونیاک رخ می‌دهد. در این تحقیق دلایل خوردگی یک نمونه تیوب فین‌دار اکونومایزر با آنالیز شیمیایی تیوب و فین‌های آن، آنالیز شیمیایی محصولات خوردگی با روش‌های XRD و XRF و ارتباط بین مورفولوژی خوردگی و نتایج آنالیز بررسی شد. همچنین، اثر کاهش ضخامت تیوب بر استحکام مکانیکی در شرایط عملیاتی مطالعه شد. طبق نتایج، اکسیژن عامل اصلی خوردگی است. همچنین علیرغم کاهش ضخامت تیوب در اثر خوردگی، تیوب دارای استحکام مکانیکی کافی در برابر فشارهای داخلی است.}, keywords_fa = {سیستم‌های تولید بخار,اکونومایزر,خوردگی,استحکام مکانیکی}, url = {https://www.farayandno.ir/article_12389.html}, eprint = {https://www.farayandno.ir/article_12389_d20062f196ed1d3bfaf4d2608ffbe792.pdf} } @article { author = {Saberimoghaddam, Ali and azadegan jahromi, sajad and Bahri Rasht Abadi, Mohammad Mahdi}, title = {Performance of External Refrigeration Cycles in Hydrogen Liquefaction Process}, journal = {Farayandno}, volume = {9}, number = {48}, pages = {66-78}, year = {2015}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {Hydrogen gas is a clean and renewable fuel that can be a substitution for conventional fossil fuels, but hydrogen gas has a very low density, which limits the transportation, storage, and usage of it as a fuel. Liquefaction of hydrogen is one of the best methods for densifying hydrogen and reducing the obstacles of its application as a fuel. The use of helium refrigeration cycles in the hydrogen liquefaction process is a suitable and innovative method to improve the production capacity and reduce the energy consumption of current hydrogen liquefaction plants. In this study, a brief discussion about hydrogen liquefaction process is present, hydrogen liquefaction cycles based on helium refrigeration are reviewed, and advantages and disadvantages of them are considered.}, keywords = {hydrogen liquefaction,helium refrigeration,cryogenic,Hydrogen}, title_fa = {عملکرد چرخه های سردسازی خارجی در فرآیند مایع سازی هیدروژن}, abstract_fa = {هیدروژن سوختی پاک و تجدیدپذیر است که قابلیت جایگزین شدن با سوخت‌های رایج فسیلی را داراست، اما به دلیل چگالی بسیار پایین، استفاده از آن به عنوان سوخت، مشکلاتی را در زمینه‌ی حمل ونقل و نگه‌داری ایجاد می‌کند. مایع‌سازی هیدرژن بهترین روش در چگال‌تر ساختن این سوخت و کاهش مشکلات ناشی از چگالی پایین آن است. استفاده از سیکل‌های سردساز هلیومی روشی مناسب و جدید برای مایع‌سازی هیدروژن محسوب می‌شود که امکان ارتقاء ظرفیت تولید و کاهش مصرف انرژی را نسبت به واحد‌های فعلی مایع‌سازی هیدروژن ایجاد می‌کند. در این تحقیق، ابتدا توضیح مختصری پیرامون فرآیند مایع‌سازی هیدروژن ارائه می‌شود و در ادامه سیکل‌های مایع‌سازی هیدروژن بر پایه چرخه‌ی سردساز هلیومی مرور می‌گردد و مزایا و معایب آنها مورد بررسی قرار می‌گیرد.}, keywords_fa = {مایع سازی هیدروژن,سردساز هلیومی,کرایوژنیک,هیدروژن}, url = {https://www.farayandno.ir/article_12390.html}, eprint = {https://www.farayandno.ir/article_12390_40cdf935a2ef3244a53c334e2d785280.pdf} } @article { author = {amir atashani, masoud and Moshdeei, Mojtaba and Mahmoud Zadeh, Ali Asghar}, title = {Prioritization of management accounting techniques on National Iranian Oil Refining and Distribution Company using the analytic hierarchy process (AHP) method}, journal = {Farayandno}, volume = {9}, number = {48}, pages = {79-92}, year = {2015}, publisher = {National Iranian Oil Refining and Distribution Company (NIORDC)}, issn = {1735-6466}, eissn = {2821-160X}, doi = {}, abstract = {Using the analytical hierarchy process (AHP), this study aims to prioritize management accounting techniques in National Iranian Oil Refining and Distribution Company (NIORDC). The main data gathering method was the questionnaire with a number of predetermined questions distributed among the selected purposive sample of the high-ranked experts working in 13 sub-companies of NIORDC in 2014. The results of this study indicate that among the Management Accounting Techniques, Cost Management Technique is in priority in NIORDC and its subsidiaries. However, a similar study conducted in National Iranian Oil Company (NIOC) concludes that Activity-Based Costing method is dominant. Comparing three out of four mother companies of Iranian Petroleum Ministry i.e. NIOC, National Iranian Gas Company (NIGC) and NIORDC, cost management, economic value added and Activity-Based Costing techniques are highly preferred, respectively.}, keywords = {management accounting techniques,AHP,National Iranian Oil Refining and Distribution Company}, title_fa = {اولویت بندی تکنیک های حسابداری مدیریت در شرکت ملی پالایش و پخش فرآورده های نفتی ایران با استفاده از فرآیند تحلیل سلسله مراتبی (AHP)}, abstract_fa = {تحقیق حاضر به اولویت بندی تکنیک های حسابداری مدیریت در شرکت پالایش و پخش با استفاده از فرآیند تحلیل سلسله مراتبی میپردازد. ابزار جمع آوری اطلاعات در این تحقیق پرسشنامه بود که بین نخبگان توزیع شد. دادههای جمع آوری شده مربوط به 13 شرکت زیر مجموعه شرکت پالایش و پخش در سال 1393 می باشد.نتایج به دست آمده ازتحقیق بیانگر این است که درشرکت پالایش و پخشو زیر مجموعه های آن ، تکنیک مدیریت هزینه در اولویت است در صورتی که در تحقیق مشابهی که در شرکت نفت انجام شده است، پیشنهاد گردیده است از روش هزینه یابی بر مبنای فعالیت استفاده گردد. در مقایسه ای که بین سه شرکت اصلی زیرمجموعه وزارت نفت یعنی شرکت نفت ایران، شرکت گاز و شرکت پالایش و پخش به عمل آمده است، به ترتیب تکنیکهای مدیریت هزینه، ارزش افزوده اقتصادی و مدیریت هزینه بیشترین امتیاز را در این تحقیق به خود اختصاص داد.}, keywords_fa = {تکنیک های حسابداری مدیریت,تحلیل سلسله مراتبی,شرکت ملی پالایش و پخش فرآورده های نفتی ایران}, url = {https://www.farayandno.ir/article_12391.html}, eprint = {https://www.farayandno.ir/article_12391_4bfe1dd272403689e5dc2f9297905946.pdf} }