per
شرکت ملی پالایش و پخش فرآورده های نفتی ایران
نشریه علمی فرآیند نو
1735-6466
2821-160X
2015-06-01
10
49
5
18
13748
Review
بهینهسازی انرژی واحد تبدیل کاتالیستی پالایشگاه آبادان با استفاده از تحلیل اکسرژی
Energy Optimization of Catalytic Reforming Unit of Abadan Oil Refinery Using Exergy Analysis
سجاد خشه
sajjadkhasheh@gmail.com
1
فرهاد شهرکی
fshahraki@eng.usb.ac.ir
2
کیانوش رزاقی
razzaghi@mail.usb.ac.ir
3
مسعود نعمت الهی
masoud.nematollahi@yahoo.com
4
دانشگاه سیستان و بلوچستان
دانشگاه سیستان و بلوچستان
دانشگاه سیستان و بلوچستان
پالایشگاه آبادان
در بهینه سازی انرژی واحدهای صنعتی مهمترین گام، شناسایی محل اتلاف کیفیت انرژی است. تحلیل اکسرژی با بیان کیفیت انرژی، محل برگشتناپذیری فرآیند و اتلاف اکسرژی را مشخص میکند. بر اساس اتلاف اکسرژی هر دستگاه، نقاط بحرانی واحد مشخص میشود. تحلیل اکسرژی واحد تبدیل کاتالیستی آبادان نشان میدهد، مبدلهای پیش گرمایش خوراک کورههای بخش تصفیه و تبدیل (H-E-1 و P-E-1)، دارای بیشترین اتلاف اکسرژی شبکه مبدلهای حرارتی است. لذا با افزودن دو جفت مبدل به این دو مبدل، شبکه مبدلهای حرارتی اصلاح شد و اتلاف اکسرژی واحد MMBtu/hr 0769/4 در زمستان و MMBtu/hr 4563/4 در تابستان کاهش مییابد. این طرح اصلاحی نیازمند حدود 215 هزار دلار سرمایهگذاری است و موجب کاهش بار حرارتی گرمایش و سرمایش خارجی حدود MMBtu/hr 15 و MMBtu/hr 9 میشود که باعث حدود 7% کاهش مصرف انرژی میشود. دوره بازگشت سرمایه طرح 45 ماه و سپس سالیانه حدود 57 هزار دلار صرفهجویی را در پی دارد.
Identification of the location of energy loss is the most important step in energy optimization of industrial plants. Exergy analysis specifies the points of irreversibility and the amount of exergy loss. According to the equipment exergy loss, the energy bottlenecks of unit will be specified. Exergy Analysis of Abadan catalytic reforming unit shows heat exchangers, which preheating the feed streams of unifiner and platformer fire heaters (H-E-1 and P-E-1), have the maximum exergy loss of heat exchangers network. Adding two pairs of heat exchangers to these heat exchangers, the network is retrofitted. Therefore the exergy loss reduces 4.0769 (MMBtu/hr) in winter and 4.4563 (MMBtu/hr) in summer. This retrofit needs approximately $215000 investment and will also reduce heat duty of hot and cold utilities to 15 and 9 MMBtu/hr, respectively. This retrofit causes 7% energy saving. The payback period of this investment is 45 months and then will save $57000 annually.
https://www.farayandno.ir/article_13748_e8fbe21ecaddc983ffa044fe736bcb98.pdf
تبدیل کاتالیستی
تحلیل اکسرژی
اتلاف اکسرژی
شبکه مبدلهای حرارتی
Exergy Analysis
Exergy Loss
Catalytic reforming
Heat exchanger network
per
شرکت ملی پالایش و پخش فرآورده های نفتی ایران
نشریه علمی فرآیند نو
1735-6466
2821-160X
2015-06-01
10
49
19
27
13749
Review
ارایه مدل جدید برای محاسبه ضریب نفوذ برخی گازها در آب
A New Model for Estimation of Diffusion Coefficients of Some Gases in Water
احمد رهبر
ahmadrahbar@iust.ac.ir
1
افشین همتا
hamta@chemeng.iust.ac.ir
2
علم و صنعت ایران
ضریب نفوذ مهمترین پارامتر موثر در انتقال جرم میباشد. برای طراحی عملیات انتقال جرم دانستن ضرایب نفوذ بسیار اهمیت دارد. خصوصیات فیزیکی حلال و حلشونده خصوصیاتی است که با کمترین هزینه در اختیار میباشد؛ بنابراین مدلسازی انجام شده، بر اساس رابطه Wilke_Chang که همراه با اصلاحاتی تجربی بوده، شعاع مولکول حل شونده (R) و پارامتر ξ اضافه شده است. با توجه به اهمیت پیش بینی ضریب نفوذ CO_2 در آب، اصلاحات تجربی، با تمرکز بر نفوذ CO_2 در آب صورت گرفت. نتایج نشان میدهد که برای نفوذ گازهای CO_2،O_2 و N_2، رابطه ویک چنگ به طور متوسط %9و رابطه ارائه شده در این تحقیق %8/3خطا دارد؛ همچنین رابطه ویک چنگ برای نفوذCO_2 در آب دارای %5/6 خطا بوده در حالی که رابطه ارائه شده، این میزان خطا را به %7/2 کاهش داده است.
Diffusion Coefficient is the most important effective parameter in mass transfer. A correlation for estimating the diffusion coefficients of some gases is presented. The new correlation is based on physical properties of the solvent and solute which are available with a minimum cost. The modeling is based on Wilke-Chang model with empirical corrections in which solute molecule radius (R) and ξ parameter have been taken into account. The results reveals that while Wilke-Chang correlation for prediction of diffusion of CO_2, N_2 and O_2 has the 9% error and new correlation has only 3.8%. Also Wilke-Chang prediction for diffusion of CO2 in water has 6.5% error while new model predicts that with 2.7% error.
https://www.farayandno.ir/article_13749_f10f93797ad3c768063eee6944598beb.pdf
ضریب نفوذ
کربن دی اکسید
آب
مدلWilke_Chang
Diffusion Coefficient
CO_2
water
Wilke Chang
per
شرکت ملی پالایش و پخش فرآورده های نفتی ایران
نشریه علمی فرآیند نو
1735-6466
2821-160X
2015-06-01
10
49
28
53
13750
Review
مدلسازی ترمودینامیکی کوره پیشگرمکن نفت خام
Thermodynamic modeling of crude oil preheating furnace
علی چائی بخش لنگرودی
chaibakhsh@gmail.com
1
نسیم انسان صفت
nasim_ensansefat@yahoo.com
2
علی جمالی
ali.jamali@guilan.ac.ir
3
رامین کوهی کمالی
kouhikamali@guilan.ac.ir
4
حمید رضا نجفی
hrnajafi@hotmail.com
5
دانشگاه گیلان
دانشگاه گیلان
دانشگاه گیلان
دانشگاه گیلان
طراحان نفتون آریا
در این مقاله، مجموعه کوره پیشگرمکن نفت خام (خوراک ستون تقطیر) مورد بررسی قرار میگیرد. مدل ریاضی برای بخش جابجایی و تشعشعی کوره در شرایط ایدهال ارائه شده، همچنین مدل سادهای برای فرایند احتراق پیشنهاد میگردد. مدلسازی ارائه شده برای یک گذر از کوره مورد بررسی میباشد. معادلات پیشنهادی بر اساس قوانین ترمودینامیک، پایستگی جرم، پایستگی انرژی، قوانین انتقال حرارت و همچنین روابط نیمه تجربی حاکم بر رفتار نفت خام تعیین میشوند. پارامترهای مدل بر اساس مشخصات فنی و دادههای تجربی حاصل از یک کوره واقعی تعیین میشوند. مقایسه نتایج حاصل از مدلسازی با دادههای موجود، قابلیت روش پیشنهادی را در پیشبینی دمای نفت خروجی از کوره و دمای لولهها نشان میدهد.
In this paper, a thermodynamic modeling approach is presented for characterizing the behaviors of a crude oil preheat furnace. Convection sections and radiant section are modeled and a simple model for combustion is given, where only a single pass is considered for modeling. Thermal equations are proposed based on mass and energy balance, thermodynamic, heat transfer and also based on semi-empirical relation for the crude oil thermo-physical behaviors. The parameters are defined based on geometrical information, empirical relations and experimental data from real furnace performances. Capability of the developed models in predicting the output oil temperature is validated by a comparison between the obtained results from simulation experiments and the data taken from the real system responses.
https://www.farayandno.ir/article_13750_a74d0ddc39fca15292a514eec420d66d.pdf
کوره پیشگرمکن
انتقال حرارت
مدلسازی ترمودینامیکی
نفت خام
Preheat furnace
Heat Transfer
Thermodynamic Modeling
Crude oil
per
شرکت ملی پالایش و پخش فرآورده های نفتی ایران
نشریه علمی فرآیند نو
1735-6466
2821-160X
2015-06-01
10
49
54
62
13751
Review
مقایسه روش پروکسون با اکسیداسیون منفرد جهت کاهش مقدار لجن مازاد تصفیهخانه پالایشگاه بندرعباس
Comparison of Peroxone method with Individual Oxidation for Minimization of Excess Sludge in Bandar Abbas Refinery's Wastewater Treatment Plant
مهدی جلایر
mahdi_jalayer@yahoo.com
1
رضا مرندی
marandi_51@yahoo.com
2
تورج نصرآبادی
tnasrabadi@gmail.com
3
مهندس پالایش شرکت پالایش نفت بندرعباس
دانشیار دانشگاه ازاد اسلامی تهران
استادیار دانشگاه تهران
بیشک پالایشگاهها در زنجیره تامین سوخت وانرژی نقشی غیرقابلانکار دارند. توجههمزمان به تداوم فرآیند تولید در کنار عدم آلودگی محیطزیست نیازمند بهینهسازی فرآیندهای تصفیهپساب و پسماندصنعتی و نیز استفاده از تکنیکهاینوین در تصفیهخانههای پالایشگاهی است. مقدار لجنمازادبیولوژیکی حاصل از تصفیه پسابصنعتی در پالایشگاهبندرعباس حدود 40 تا 50تن در ماه است. برآوردها نشان میدهد که هزینه مدیریت پسماند لجن در این واحد صنعتی حدود 40 تا 60 درصد کل هزینه های تصفیهخانه است. علاوه بر این، دفع این مقدار پسماند که اغلب آغشته به مواد نفتی است موجب آثار مخرب زیست محیطی خواهد بود لذا برای به حداقل رساندن مقدار لجن مازاد، در این تحقیق از روشهای اکسیداسیون پیشرفته استفاده گردید. نتایج حاصله نشان میدهد که استفاده از اکسیداسیون با پراکسید هیدروژن در مقایسه با ازناسیون و نیز روش ترکیبی پروکسون بازده بهتری دارد. در بهینهترین حالت آزمایشها، مقدار لجنمازاد تا بیش از33/77درصد و COD لجن تا 97/56 درصد کاهش یافت.
Refineries in the cycle of fuel and energy supplying have an incomparable role. Continuous production with attention to non contamination of environment needs to optimization of wastewater and disposal treatment processes and using of new techniques in wastewater treatment plants. Amount of excess biological sludge in Bandar Abbas refinery is 40-50 ton/month. Estimations show that the cost of sludge management in this plant is about 40-60% of total cost. Addition to disposal of this sludge with oily contaminates maybe cause to damage of environment. For minimization of excess sludge in this research used advanced oxidation processes. Results show that using of hydrogen peroxide in compare with ozonation and peroxone had better results. In optimized condition, amount of excess sludge and COD can reduce up to 73.33% and 56.97% respectively.
https://www.farayandno.ir/article_13751_19ad972ed89c889d19206890be844f0a.pdf
کاهشلجن
اکسیداسیونپیشرفته
پروکسون
لجن بیولوژیکی
پراکسیدهیدروژن
sludge reduction
Advanced Oxidation
peroxone
biological sludge
Hydrogen peroxide
per
شرکت ملی پالایش و پخش فرآورده های نفتی ایران
نشریه علمی فرآیند نو
1735-6466
2821-160X
2015-06-01
10
49
63
80
13752
Review
مطالعه تجربی تصفیه پساب نفتی با استفاده از غشاء نانوساختار پلیاترسولفون
Experimental study of treating oily wastewater using polyethersulfone nanostructured membranes
غلامرضا باکری
bakeri@nit.ac.ir
1
مصطفی رحیم نژاد
rahimnejad@nit.ac.ir
2
زینب فلاح نژاد
zeynab_fallahnejad@yahoo.com
3
دانشگاه صنعتی نوشیروانی بابل - استادیار
استادیار/دانشگاه صنعتی نوشیروانی بابل
دانشجوی کارشناسی ارشد دانشگاه صنعتی نوشیروانی بابل
آلودگی پسابهای مراکز توزیع فرآوردههای نفتی یکی از مهم ترین معضلات زیستمحیطی در دهه اخیر می باشد. در این پژوهش عملکرد غشاهای مختلف در تصفیه پساب نفتی بررسی شده است و تاثیر پارامترهای عملیاتی مانند فشار، غلظت و سرعت جریان خوراک بر عملکرد غشاء نانوساختار الیافتوخالی پلی اتر سولفون موردارزیابی قرار گرفته است. با افزایش فشار، میزان فشردگی و گرفتگی غشاء افزایش و عملکرد غشاء کاهش می یابد بنابراین شرایط بهینه عملیاتی برای انجام آزمایش ها فشار 1 bar و سرعت جریان بالا و غلظت پایین خوراک می باشد. با افزایش اندازه متوسط حفره غشاء، شار عبوری از غشاء افزایش می یابد. در این پژوهش از غشاهای پلی اتر سولفون که از پرکاربردترین غشاها در تصفیه پسابهای نفتی بشمار میآیند با قابلیت جداسازی 100 درصدی گازوییل از پساب استفاده گردید بطوری که غشاء M1، با داشتن حداکثر اندازه حفره، حداکثر شار و پس دهی به عنوان غشاء مطلوب انتخاب شد.
The oily wastewaters from oil refineries and oil distribution centers are one of the most important environmental pollutants in recent decades. In this research, the performance of different membranes in oily water treatment has been reviewed and furthermore, the performance of nanostructured polyethersulfone (PES) hollow fiber membranes in oil/water separation process has been investigated and the effect of operating parameters such as pressure, oil concentration and cross flow velocity of feed on the membrane performance is studied. Increasing the pressure makes more membrane compactness, therefore the optimum operating conditions for oil separation are P = 1, low feed concentration and high cross flow velocity. All the fabricated membranes showed complete separation of oil from water. Therefore, they can effectively be used in oily water treatment. Membrane #M1 with the pore size of 15.6 nm showed the best permeation flux of 12.4 (L/m2/hr) with 100% oil rejection.
https://www.farayandno.ir/article_13752_ba64aab4d3beb8d4a9c5fba1fb4f9a0e.pdf
پپسابهای نفتی
معضلات زیستمحیطی
عملکرد غشاء
غشاء نانوساختار
غشاء الیاف توخالی پلیاترسولفون
Oily wastewaters
environmental problems
Membrane performance
nanostructured membrane
Polyethersulfone hollow fiber membrane
per
شرکت ملی پالایش و پخش فرآورده های نفتی ایران
نشریه علمی فرآیند نو
1735-6466
2821-160X
2015-06-01
10
49
81
98
13753
Review
بهینه سازی اقتصادی واحد بازیابی گاز طبیعی مایع با استفاده از ژنتیک الگوریتم با جستجوی مجذوری
Economic optimization of liquefied natural gas recovery unit recovery using by genetic algorithm with quadratic search
ترانه جعفری بهبهانی
jafarit@ripi.ir
1
زهرا جعفری بهبهانی
zjbehbahani@yahoo.com
2
مسئول پروژه
دانشگاه شیراز
ژنتیک الگوریتم با جستجوی مجذوری یک روش ترکیبی برای بهینه سازی اقتصادی یک واحد فرآیندی مدل شده با نرم افزار های شبیه سازی فرآیند می باشد. از طریق ترکیب الگوریتم ژنتیک عادی با الگوریتمی بر اساس جستجوی مجذوری می توان تعداد محاسبات مربوط به توابع هدف را کاهش داد. روش پیشنهادی شامل مزایای ژنتیک الگوریتم عادی و تکنیک های جستجوی مجذوری می باشد . از جمله این مزایا تعیین بهینه مطلق توابعی با احتمال ناپیوستگی بالا و با همگرایی بیشتری نسبت به ژنتیک الگوریتم عادی می باشد. در این پژوهش بهینه سازی اقتصادی واحد بازیابی گاز طبیعی مایع با استفاده از ژنتیک الگوریتم با جستجوی مجذوری و ژنتیک الگوریتم عادی با یکدیگر مقایسه شده اند. نتایج نشان می دهد در صورت استفاده از پارامترهای ژنتیکی یکسان ، همگرایی ژنتیک الگوریتم با جستجوی مجذوری و همچنین دقت روش پیشنهادی بهتر از ژنتیک الگوریتم عادی می باشد.
The genetic/quadratic search algorithm (GQSA) is a hybrid genetic algorithm (GA) for optimizing plant economics when a process simulator models the plant. By coupling a regular GA with an algorithm based upon a quadratic search, the required number of objective function evaluations for obtaining an acceptable solution decreases significantly in most cases. The GQSA combines advantages of GA and quadratic search techniques, e.g. determining a global optimum for a problem with a high probability for discontinuous as well as non-convex optimization problems while at the same time providing faster convergence than conventional GA. In this work, the performance of both the GQSA and the GA was compared using four different test functions and an economic optimization problem for a turbo-expander process. Numerical test results indicate that the convergence of the GQSA is either better than to those of GA for all tests employing the same genetic parameters
https://www.farayandno.ir/article_13753_979535ae3c0c0f0bd499bcfe5a897d0f.pdf
ژنتیک الگوریتم
جستجوی مجذوری
فرآیند بازیابی گاز طبیعی مایع
بهینه سازی
genetic algorithm
quadratic search
liquefied natural gas recovery unit recovery
Optimization
per
شرکت ملی پالایش و پخش فرآورده های نفتی ایران
نشریه علمی فرآیند نو
1735-6466
2821-160X
2015-06-01
10
49
99
113
13754
Applied Science
شناسایی علل فرسودگی شغلی کارکنان شرکت ملی پالایش و پخش فرآورده های نفتی ایران و رابطه آن با بلوغ سازمانی نیروی انسانی
The Identification of Causes of employee burnout of the National Iranian Oil Refining and Distribution Company and its relationship with human resource organizational maturity.
فتاح شریف زاده
sharifzadeh@atu.ac.ir
1
عباس صالح اردستانی
saleh_1340@yahoo.com
2
ماریا حمیدیان
hamidians@gmail.com
3
حجت اله نوری
hojat.noori@gmail.com
4
مدیر گروه مدیریت دولتی دانشکده مدیریت و حسابداری دانشگاه علامه طباطبایی
رئیس دانشکده مدیریت دانشگاه آزاد اسلامی واحد تهران مرکزی
کارشناسی ارشد مدیریت دولتی گرایش تحول ، رئیس امور اداری دانشکده علوم دریایی دانشگاه صنعت نفت، مدرس دانشگاه پیام نورآمل.
شرکت ملی پالایش و پخش فراورده های نفتی ایران - ستاد - کارشناس ارشد گزینش
نیروی انسانی از مهمترین منابع استراتژیک سازمان میباشد لذا سلامت کارکنان از عوامل موثر در بهرهروری خواهدبود. در این میان سلامت روحی و روانی میتواند حتی از سلامت جسمانی موثرتر بوده و بر آن موثر واقع گردند. نویسندگان در این مقاله سعی در شناسایی عوامل موثر در علل فرسودگی شغلی در کارکنان شرکت ملی پالایش و پخش فرآورده های نفتی داشته و سپس تاثیر این عوامل را بر بلوغ توانمندی کارکنان که از عوامل اساسی موفقیت سازمان و دستیابی به اهداف آن میباشد پرداختهاند. نتایج حاصل بیانگر شناسایی 19 فاکتوردر سه دسته عوامل سازمانی و عوامل بینفردی ، عوامل درون-فردی شدهاست. گویههای سن، آگاهی از خط-مشیسازمانی، ارزیابی عملکرد، تسهیلات رفاهی، محیط کاری، روابط بینفردی، رهبری و تعهد عاطفی بر بلوغ توانمندی کارکنان تاثیر معنیداری دارد.
Human resource is the most important resource in the organization. However, the mental health is even more effective than physical health and it may have effects on basic elements of an organization. This study examines the causes of job burnout among the employees of National Refining and Distribution Company and the influence of these factors on employee empowerment and then effect of these factors in People capability maturity. These factors are been bases element in organization and reached to its objectives. the results identify 19 factors in three categories including organizational factors; interpersonal factors; and intrapersonal factors;. job burnout variable has a significant effect on the maturation of employee empowerment and among the variable components of job burnout, the items of age, awareness of organizational policies, performance evaluation, and welfare facilities, working environment, interpersonal relationships, leadership and emotional commitment have a significant impact on People capability maturity
https://www.farayandno.ir/article_13754_c01a81ccf04bfbfce9fa64145ce81277.pdf
فرسودگی شغلی؛ بلوغ توانمندی کارکنان
خط مشی سازمانی
ارزیابی عملکرد
روابط بین فردی
Job Burnout
People capability maturity
organizational policies
performance evaluation
intrapersonal relations